我的位置：
| 經銷商 | 聯系方式 | 價格 |
|---|---|---|
| 愛思創Extron電子 | 4000.398766、 021-3760 1568 | 面議 |
| 瑞達訊科技 | 0755-83361979 | 面議 |
| RGB 580xi, RGB 580xi AAP models | |||
| Video — RGB 580xi | |||
|---|---|---|---|
| Gain | 0.35 V to 1.45 Vp-p | ||
| Bandwidth | 300 MHz (-3 dB) | ||
| Video input — RGB 580xi | |||
| Number/signal type | 1 analog RGBHV, RGBS, RGsB, RsGsBs | ||
| Connectors | 1 female 15-pin HD | ||
| Nominal level | 0.7 Vp-p for RGB | ||
| Minimum/maximum levels | Analog: 0.3 V to 1.45 Vp-p with no offset | ||
| Impedance | 75 ohms or high Z, switchable (set to 75 ohms if no local monitor is connected) | ||
| Horizontal frequency | Autoscan 15 kHz to 150 kHz | ||
| Vertical frequency | Autoscan 40 Hz to 140 Hz | ||
| Return loss | <-30 dB @ 5 MHz | ||
| DC offset (max. allowable) | 2.0 V | ||
| Video input — RGB 580xi AAP, RGB 580xi I AAP, RGB 580xi S AAP, RGB 580xi SI AAP | |||
| Number/signal type | 1 analog RGBHV, RGBS, RGsB, RsGsBs | ||
| Connectors | 1 female 15-pin HD | ||
| Video output — RGB 580xi | |||
| Number/signal type | 1 analog RGBHV, RGBS, RGsB | ||
| Connectors | 5 BNC female | ||
| Nominal level | 0.7 Vp-p for RGB | ||
| Minimum/maximum levels | 0.35 V to 1.45 Vp-p | ||
| Impedance | 75 ohms | ||
| Return loss | -30 dB @ 5 MHz | ||
| DC offset | ±5 mV maximum with input at 0 offset | ||
| Video output — RGB 580xi AAP, RGB 580xi I AAP, RGB 580xi S AAP, RGB 580xi SI AAP | |||
| Number/signal type | 1 analog RGBHV, RGBS, RGsB | ||
| Connectors | 1 female 15-pin HD | ||
| Sync | |||
| Input type | RGBHV, RGBS, RGsB, RsGsBs | ||
| Output type | RGBHV, RGBS, RGsB | ||
| Input level | 2 V to 5.5 Vp-p with ±0.2 VDC offset max. | ||
| Output level | TTL: 4 V to 5 Vp-p, unterminated | ||
| Input impedance | 510k ohms | ||
| Output impedance | 75 ohms | ||
| Max. propagation delay | 85 ns | ||
| Max. rise/fall time | 2 ns | ||
| Polarity | RGBHV: Polarity follows input when RGBHV is input and the sync polarity switch is set to Off. Sync polarity is negative if the sync polarity switch is set to On. RGBS, RGsB: negative |
||
| Audio | |||
| Gain | Unbalanced output: 0 dB; balanced output: +6 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±0.05 dB | ||
| THD + Noise | 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level | ||
| S/N | >90 dB at maximum output, balanced (unweighted) | ||
| Stereo channel separation | >90 dB @ 1 kHz to 20 kHz | ||
| Audio input | |||
| Number/signal type | 1 PC level stereo, unbalanced | ||
| Connectors | (1) 3.5 mm stereo mini audio jack (female) (tip, ring, sleeve) | ||
| Impedance | >5k ohms, unbalanced, DC coupled | ||
| Nominal level | -10 dBV (316 mV) | ||
| Maximum level | +8.5 dBu, (balanced or unbalanced) at 1% THD+N | ||
|
|||
| Audio output | |||
| Number/signal type | 1 buffered stereo (2 channel), balanced/unbalanced | ||
| Connectors | (1) 3.5 mm, captive screw connector, 5 pole | ||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
| Gain error | ±0.1 dB channel to channel | ||
| Maximum level (600 ohm) | > +14 dBm, balanced or unbalanced at 1% THD+N | ||
| Control/remote — interface | |||
| Serial control port | RS-232, captive screw connector, 3 pole | ||
| Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity | ||
| Serial control pin configuration | 1 = TX, 2 = RX, 3 = GND | ||
| Program control | Extron's control/configuration program for Windows® Extron's Simple Instruction Set (SIS™) |
||
| General | |||
| Power | |||
| RGB 580xi | 100VAC to 240VAC, 50/60 Hz, 18 watts, internal, autoswitchable | ||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Rack mount | No, but furniture mountable with included under-desk mounting kit #70-077-01 | ||
| Enclosure type | Metal (vented) | ||
| Enclosure dimensions | |||
| RGB 580xi | 1.75" H x 6.4" W x 6.0" D 4.4 cm H x 16.3 cm W x 15.2 cm D (Depth excludes connectors.) |
||
| RGB 580xi AAP models | |||
| Faceplate | 1.4" H x 3.5" W x 0.1" D (3.6 cm H x 8.9 cm W x 0.3 cm D) (double-space high AAP plates) |
||
| Circuit board | 1.3" H x 2.5" W x 0.9" D (3.3 cm H x 6.4 cm W x 2.3 cm D) (Depth excludes connectors, knobs, and faceplate.) |
||
| Product weight | |||
| RGB 580xi I AAP 3', RGB 580xi SI AAP 3' | 0.4 lbs (0.2 kg) | ||
| RGB 580xi AAP 3', RGB 580xi S AAP 3' | 0.5 lbs (0.3 kg) | ||
| RGB 580xi AAP 6', RGB 580xi I AAP 6' | 0.6 lbs (0.3 kg) | ||
| RGB 580xi S AAP 6', RGB 580xi SI AAP 6' | 0.7 lbs (0.3 kg) | ||
| RGB 580xi AAP 12', RGB 580xi I AAP 12', | |||
| RGB 580xi S AAP 12', RGB 580xi SI AAP 12' | 1.0 lbs (0.5 kg) | ||
| RGB 580xi | 1.2 lbs (0.5 kg) | ||
| Shipping weight | |||
| AAP models | 2 lb (1 kg) | ||
| RGB 580xi | 4 lbs (2 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Listings | UL, CUL | ||
| Compliances | CE, FCC Class A, VCCI, AS/NZS, ICES | ||
| MTBF | 30,000 hours | ||
| Warranty | 3 years parts and labor | ||
|
|||
|
|||
